Butterfly Ink: Visible Image

Hello everyone…

A quick blog post from me today using the gorgeous Butterfly Ink stencil from Visible Image.

I’ve made a smooshed background using Picked Raspberry, Worn Lipstick, and Spun Sugar Distress Oxide ink pads and spritzed it slightly with water to oxidise the ink and create a speckled pattern.

With the background made, I’ve then taped the stencil in place and using Oxide Ink Pads again to create a wonderful, bright warm spicy colour to which I’ve stamped the ‘stem’ detail from Random Art of Kindness using an Archival Distress ink pad in Barn Door

What I’ve done then is sprayed Distress Resist Spray over the butterfly before applying the text stamp from Scripted Streets.  The resist spray stops me getting more ink on the butterfly but it also gives it a lovely sheen once dry.

The sentiment, from Imperfection is Beauty, has been stamped in black ink and then, using a stamping platform, been heat embossed in a gorgeous silver colour.  The design has then been finished by matting it onto silver card and then onto a 6×6″ card blank.

And that’s it today.  A simple one from me for this week’s DT inspiration and here’s the Visible Image products I’ve used for this card…

That’s all from me this week… catch you again soon.
H x

Advertisements

Dare to Swim: Visible Image

Well hello to you all and a belated Happy Easter!

I’m back with another make for the Visible Image DT today and I’ve gone all watery and deep sea like!  Dare to Swim is a stunner of a stamp set and I love (in my little textural way) to grunge it up and add layer upon layer.

Unlike most of my makes, this piece was made directly onto the kraft card blank, whereas I normally use watercolour card (and then matt it onto a card blank) as it holds much more weight.

A few of the products I’ve used in this make…

I began by braying gesso over the card blank to stop the inks I intended to use from just soaking into the card.  To add extra texture, I stamped Organics onto tissue paper (using VersaFine Claire in Nocturne) and used a matt gel to adhere to the card.

The Fibres stencil has been added in random areas using a modelling paste.  I chose the area of the stencil that had quite small holes (for want of a better word!) as the card is only 7×5″. Using Distress Oxide Spray Stains, I’ve then dripped the inks down the card and spritzed with water to create a watery effect and left to air dry as using heat would cause the card to buckle.

With the background colour in place, I’ve worked into the stencilled areas using Distress Crayons and a water brush and I’ve also used distress crayon on the edge of the card to frame it.  Using the seaweed stamp from Dare to Swim, I’ve used green and blue Distress Oxide ink pads to dot it around the bottom of the card and the little grey shoal of fishes is stamped using Archival’s Watering Can ink pad.

The circles on the right are from the gorgeous Live in the Moment set and they’ve been heat embossed using Wows! Vanilla Sparkle Glitter and Ranger’s Glossy Accents has been added to the circles to add an extra watery feel.

The fabulous Jellyfish has been heat embossed onto vellum using Wows! Opaque Bright White and coloured using watercolours before also having some glossy accents added. He’s then been fussy cut out and secured in place over some dyed cheesecloth and et voila!  Finished!

And here are the Visible Image products I’ve used for this make…

 

Dare to Swim

 

Organics

 

Live in the Moment

 

Fibres

As always, there’s lots more DT inspiration over on the Facebook page or you can catch up on the Visible Image blog or over on Instagram!

Catch up again soon… H xx

 

Wings of Change 3D Make: Visible Image

Hello everyone…

It’s such a gloomy day as I sit writing this post… very ‘meh’ outside but not to worry as I’ve bought some sunshine into the craft room with this little 3D make using Wings of Change, Random Art of Kindness and Creative Chaos, three of the recent releases by Visible Image.

I love making cards and getting messy in my journal but every now and then a 3D idea pops up and this was one such make.  I’ve got some old wooden spools left over from an old DT and as I’m forever trying to de-clutter the craft room (it really is getting ridiculous now) I thought it would be a good base to fly these gorgeous butterflies.

I started with the butterflies and flowers.  Heat embossed them onto watercolour card and fussy cut them all out before colouring using a mixture of watercolours and Distress Ink Sprays.  Once dry I’ve added some Tonic Nuvo Aqua Shimmer (in Midas Touch) and on the yellow flower (I added some white Porsca pen as well).

The wire is floristry wire I picked up in Hobbycraft eons ago (usually I like to wrap stuff in it or use it crumpled up under an embellishment) and it’s stuck using a hot glue gun.

The base has been painted in an ombré effect using acrylics and then I’ve stamped over and round the spool using the background stamps and the smaller flower from Creative Chaos.

I’ve used a white Stazon ink pad for the bottom circles and a white Posca pen for the little dots at the base of the flowers.  The flowers themselves were initially stamped using a Sepia Archival ink pad and then over stamped using just a black Versafine.  I’ve then highlighted some areas using the Posca pen again.

To hold the butterflies in place, I’ve stuffed some kitchen roll down he spool and added some hot glue to each end of the wire before inserting it.  The butterflies have been added first and lastly I added the flower image (which has had extra assistance by the way of a strip of acetate holding it to the stalk so it didn’t wobble).  Lastly, I’ve dyed some cheese cloth using Distress Oxide Sprays and used it as grass.

Here’s some of the products I’ve used for this make…

And here are the Visible Image stamp sets I’ve used…

Wings of Change

 

Creative Chaos

 

Random Art of Kindness

And there you have it.  One rather charming make which now sits atop a box on my desk… a little bit of Spring right there!

As always, don’t forget to pop on over to the Visible Image blog… lots of inspiration and ideas from all the DT members and of course the Visible Image Facebook page has some awesome makes on it from everyone.  Don’t be shy, come on in and get involved!  We’re af friendly bunch – honestly!

Until next time… H xx

See Everything: Visible Image

Hello again everyone,

I’m back today sharing a card I made using the new (and rather popular!) See Everything stamp set from Visible Image.  I absolutely adore this set… ticks all the boxes for me.  You can make grungy distressed cards or something elegant and simple.

I made the card for my daughter’s birthday and I knew she would also love this set as she is very much into graphic images and bright colours.

Obviously the main image is the See Everything stamp which I’ve reversed to get the full face effect.  If you haven’t used this technique before (I hadn’t – good ol’ YouTube!) I found stamping it carefully onto acetate and then using the acetate to ‘stamp’ the image the easiest method.  You do have to be careful and not slide the stamp when stamping initially or when pressing the acetate onto your background but if you’re careful you can get some amazing effects!  I used Versafine to stamp and then I heat embossed both images in Wow’s Superfine Black powder (it really is the best).

Before adding the background colour, I masked out the areas I wanted to colour using Pēbēo’s Drawing Gum.  Once the gum had fully dried (air dry) I used watercolour to add the background colour and allowed it to dry once more before adding Distress Crayon through the Two Tone stencil.  I then smudged the circles a bit using a watercolour brush as I didn’t want a perfect circle.

I could then do the bit I love… peeling away all the gum!   This reveals beautifully white areas I could then paint using a mixture of watercolours and Distress Spray Stains.

Wanting to fill the card as much as possible, I then stamped various other Visible Image stamps (see below) to fill the areas.  I love the little lightbulb from Glimmer of Light and have highlighted them using a Posca pen and in-filled using Derwent Intense pencils.

Once I had all the different stamps done and dusted and everything was coloured, I added Nuvo Aqua Shimmer in Glitter Gloss to some of the circles and then Ranger’s good old Glossy Accents to others.

To finish, I’ve matted the background onto bright yellow and orange card before popping on a card blank (8×8″).

I have to say, she loved the card and I was chuffed with how it turned out!

So, here is the pretty extensive list of Visible Image stamps used… see if you can spot which ones I’ve used from each set!

See Everything

 

Random Art of Kindness

 

Glimmer of Light

 

Universal

 

Shape It Up

 

Imperfection is Beauty

 

Life is Beautiful

 

Two Tone

Phew!  Think I got them all!?

There has been some stunning makes using the new mixed stamps on the Visible Image FaceBook page so don’t forget to pop in and check them out.  Everyone’s makes look just stunning!

Hope to see you all again soon… H xx

Wings of Change: Visible Image

Hello there everyone…

I’m back today with, what has to be, one of favourite makes lately and I’ve been itching to share this one.  I’ve used the beautiful new Wings of Change stamp set from the fabulous Visible Image.  I am absolutely loving these new mixed media stamps and I know a lot of  you are too.

I wanted to make a textured-layered-mixed media type card so to start I grabbed a sheet of vellum and using a brayer, roughly added some white acrylic.  I definitely wasn’t careful about this as I wanted a rough look.

Over this I’ve used Archival’s Watering Can ink pad to stamp some background interest using stamps from Creative Chaos and See Everything.  When this was dry, I’ve pulled out my old and trusty sewing machine to stitch around the edges.

To create the butterflies, I’ve first made a background using alcohol inks on yup paper.  I’ve used Tim Holtz’s colours for Ranger and the colours are so intense and just beautiful.  I stuck with blues, purples and pinks but they would work in any colourway you fancied.

With the background 100% dry, I’ve given it a quick swipe with an anti-static cloth and stamped all the butterflies from the set over and over.  They’ve then been stamped again onto vellum using VersaFine’s Onyx Black ink pad and then heat embossed them using Wow’s Black Twinkle powder.  For the final layer, they’ve been stamped onto acetate using Archival ink before all being fussy-cut out, ready for layering.  The words are from the ‘metamorphosis’ stamp (with the Wings of Change set) where I’ve trimmed them to make more of a statement.

The butterflies are layered with the vellum at the bottom then the coloured, alcohol ink for the middle layer and finally the acetate layer on top (I’ve glued them down their middles only so I can bend their wings so they stand out more ).  The little strips of words have then been glued over the acetate in the middle of the butterflies.

I then had the magic idea of sewing the butterflies onto the background vellum so it would match the border I’d sewn previously.  So, I lightly glued them in place and gave my little sewing machine a  total heart attack by asking it to do what I shouldn’t but bless it, it came through for me (thank you little machine!)

Then all that was needed was for me matt it onto some black card before adhering it to a white card blank before finally folding the butterflies wings to give them some lovely dimension!

Gorgeous even if I do say so myself!

Here are the gorgeous, amazing, beautiful Visible Image stamps I’ve used for this card…

Wings of Change

 

See Everything

 

Creative Chaos

As always, head on over to the Visible Image Facebook page for daily inspiration and to see what everyone has been sharing… there are some absolutely cracking makes from everyone.  The Visible Image blog also has all our DT makes uploaded and shared, so that’s always interesting to read as it can spark an idea (well, it does with me!)

And if that wasn’t enough… keep your eyes peeled for Visible Image on Create and Craft TV (hands up who caught the awesome Wizard of Oz shows last week?!)  Mark (and Helen!) will be on there every month now, demo-ing new ideas and all their stamps and stencils!  Excellent news!!

Catch up soon folks… thanks for popping by!

H xx

 

Creative Chaos: Visible Image

Morning all…

Life seems to be rushing past me lately and there just aren’t enough hours in the day, like wading through treacle almost and I’m finding it all bit  frustrating really as I have so many projects and ideas inside my head all revolving around the absolutely damn-well fabulous new mixed media stamps from Visible Image.

Today’s make uses Creative Chaos.  A stunning stamp set incorporating delicious inky flowers and circular grungy stamps.  I (and the other design team members!) just love it!!!

I’ve made a chalky background using Distress Oxide ink pads and added some white acrylic to the edges just using my finer to smudge it in.  Having stamped the circular polka dot stamp (if you get me) using Archival’s Watering Can ink pad, I’ve then over stamped the DNA motif a few times using a VersaFine ink pad.

I wanted a grungy look to the flowers so decided to cut up an old map of The lake District I was given a while back.  I stamped the flowers, large and small, onto the chalky background and then onto the map (having chosen some interesting areas).

After trimming the flower heads from the map, I then inked the edges using Distress Ink Pads in Vintage Photo and Tea Dye and adhered them over the stamped images on the background.

I decided to add some dimension to the middle flower, to stop it looking too flat and so trimmed some white cheesecloth and black cotton and wedged both between the layers of flower (using foam tape and a hot glue gun).

Still not happy with the effect I was getting, I felt it needed some extra texture so used Inktense pencils on the flower stalks and a white Posca pen  on the stamped flower heads and over some of the background images.

I’ve split the rather wonderful sentiment up and used it either side of the main flower stalk and highlighted areas with the same white Posca pen.

To finish, I’ve added little dots of glossy accents over a selected amount of the polka dot circles which make sit so lovely to run your hands over now it’s all dry! I’ve then matted this onto black card and then onto a 7×7″ white card blank.

This make has to be one of my favs at the moment and here’s some of what I used to make it…

 

This is the original stamp set… look how utterly marvellous it is and bow down to worship it!!

Isn’t that, frankly, just a beautiful, beautiful stamp set?!  And the best thing is… all the new mixed media releases are all just as amazing!!! Mark and Helen really have pulled it out of the bag with this one… huge round of applause to them for designing and making these!!!

As always, don’t forget to follow Visible Image over on Facebook for daily inspiration from the DT and from everyone, there’s always so much to inspire you… and of course, the blog is there for a round up of everything we’ve been making!

Catch up again soon… thanks for reading.

H x

Visible Image: New Wizard of Oz Stamps

Hello again…

Visible Image have been super busy lately (as always!) and have produced some truly amazing stamps and stencils for February’s release.  The Alice in Wonderland stamps went down a storm and they were followed recently by the gorgeous Wizard of Oz stamps and dies… yes, that’s right… dies!!  Having been a Wizard of Oz fan since I was very small I was so excited to get my inky mitts on these!!

The Oz Flying Monkeys used to scare the life out of me when I was small (and even a bit now too!) and I really wanted to use them and so my first make was this card…

The dark background uses Distress Oxide ink pads in Black Soot, Hickory Smoke and Chipped Sapphire along with a splatter of Brushed Pewter Distress Spray Stain.  The moon is  Mustard Seed oxide and the swirly Time Tunnel stencil has been made using Carved Pumpkin.

The scary monkey (look at its eyes… just haunting!) has been heat embossed in Wow’s Super Fine Ebony embossing powder onto watercolour card before using a mixture of watercolours, Distress Spray Stains and Derwent Inktense pencils (and a little gold gel pen) to colour him in.

The little flying monkeys have been stamped using a Versafine Onyx Black ink pad and then heat embossed using the same Wow powder used on the large monkey.

For the sentiment, I made (another) grungy background using my much over-used oxides, and die-cut two little clouds.  Having edged them with black, I stamped the sentiment on using Wow’s Opaque bright White embossing powder and attached using foam tape.

 

My second make is a tag…

For this wee fella, I’ve heat embossed him using Wow’s Metallic Copper powder and coloured him using the same materials as before just in different colours.

I’ve upped the menacing look by giving him red eyes and they do look very demonic!

The background is my ever go-to favourite Strobe stencil over which I’ve lightly stamped the smaller monkey stamps using Archival’s Watering Can ink pad just to give a hint at the monkeys.  Having fussy cut the monkey out (and I didn’t have the dies at the time of making so excuse some of my dodgy areas!) I’ve placed him on the wall I’ve stamped using the brick stamp from the Teenage Kicks set.

The bright purple sentiment has been heat embossed using Wow’s Metalline Violet embossing powder, each word trimmed  and then added using tiny foam tape. Some stained muslin and ribbon have been threaded through the punched hole to finish.

And there you go!  Wonderful stamps (and dies) which, rightly so, have been super popular.

Check out the Visible Image Facebook page and their blog for more inspiration from the design team and to catch up on the latest releases and news… oh and don’t forget Instagram!  Use the hashtag #visibleimage to find awesome makes from all over the world!

Thanks for reading … until next time xx