The Right Direction: Visible Image

Hello everyone…

I know it’s been a while since I’ve done a Visible Image post and what better way to get back into it than with one of their new Autumnal releases.  Now we all know Visible Image are known for being that little bit different from the usual stamp companies, they go that little bit quirkier I feel and aren’t afraid to be a bit ‘out there’.  The new Autumnal releases will blow your mind!!

We all have our favourites on the DT, obviously, and I have to say this one, The Right Direction, is one I was drawn too,  Whether it’s because my Dad had a black Capri when I was growing up, whether it’s the cityscape or I don’t know… but I am loving it!

I began this make by heat embossing the cityscape using Wow’s Metallic Silver Super Fine embossing powder onto watercolour card.  Using Distress Spray Stains, I dribbled ink to make the sky, wiggling it around and spritzing with a little water to get a funky background.

The embossing powder, once set, creates a barrier between the cityscape and the sky line so you can pretty much go nuts on the colours and it doesn’t seep into each other.

The cityscape was coloured using Derwent Intense pencils, using a dash of yellow to highlight.

To create a road for the car to sit on, I stamped the stem from the Imperfection is Beauty set and used the Intense pencils again for some colour.  The sentiment, steering wheel and little cars around the edge were all heat embossed in black and the ‘Driver’ sentiment was embossed in the same silver as the cityscape.

With the car heat embossed in Wow’s Opaque Primary Cardinal Red and coloured using watercolours, I trimmed it and adhered to the card using foam tape and voila!

And here is the the fabulous new stamp set…

The Right Direction

A short and snappy post for today but I’ve got lots more makes up my sleeve!

Don’t forget to check out Visible Image over on Instagram and also the Visible Image Group page on Facebook for loads of inspiration and to see what everyone else is making with their stamps and stencils!

Catch you again soon… xx

October Guest Designer Wow! Embossing Powder

Hello everyone… or should that be ‘Cześć’ as I’ve just come back from a little break in Krakow and Lodz.  Absolutely fantastic place and thoroughly recommend to everyone!!

I was asked a while back if I’d like to be the October Guest Designer for Wow! Embossing Powder and of course I said yeeeeess please!!  Wow’s products are always on my craft desk and I honestly don’t think you can buy better quality powders (I’ve tried – always gone back to Wow!).  The sheer range of colours and genres (metallics, sparkles, opaques, pearl, glitter, even glow in the dark and puff!!) is phenomenal and their Slow Drying Embossing Pad is just perfect.  If you haven’t tried them and you’re into your stamping, just buy a couple (they’re only cheap) and try them for yourself.  You will love them and to watch them melt – so mesmerising!!

Anyway… you might have seen my makes and blog posts for Wow! Embossing Powder over the last few weeks but suddenly realised I hadn’t blogged them on my site… shocker.  My first make for them used their gorgeous Thankful stamp set with Metallic Gold Sparkle powder.

‘Merry and Bright’

Heat emboss with the Metallic Gold Sparkle, colour and add extra sparkle with a Tonic Nuvo Aqua Shimmer Pen

Distress oxide background for a chalky, grungy look with an aperture die-cut. Add more embossing powder to frame.

Finished card with the products used

You can find the full write up for Wow! over on their blog… just press HERE!

My next make for Wow! uses Aall and Create stamps and stencils and looks a little something like this and uses Black Twinkle and Pop from the Confetti Trio (the little polka dots around the edges).

‘Sparkle and Shine’

Heat emboss on watercolour card with Black Twinkle and paint using watercolour paints

Mask the border stamp to add the stencil before adding dimension to the project using glossy/crackle accents and foam dots.  Stamp polka dots around the edge to frame using ‘Pop’ from the ‘Confetti’ trio

Finished card with the products used

Again, the full write up for Wow! can be found HERE!

My next make you make not have seen as it’s part of the inspiration for Wow!’s October Challenge (Christmas) and uses just the one colour – the beautiful Rose Gold.

‘Noel’

Ombre a background, spritz with gold ink and heat emboss using the beautiful Rose Gold powder from Wow!

Tear some corrugated cardboard and swipe the slow drying embossing pad over the ridges before dusting with the Rose Gold powder and heating

Layer the elements over one another before matting onto card

Finished card with products used

So there we are.  That’s the first three of my makes although I do have a couple still to share.  Hope you like them… I’m pretty chuffed with them although to be honest the powders make it so easy!  You can see LOADS of inspiration over on Wow!’s Facebook page or upload your own makes to their Facebook Fan Page and see what everyone else has been up to!

I’ll be back soon with new makes to share.

H xx

Recycle: Visible Image

Hello everyone…

My day for Visible Image inspiration has ticked on round again (where do these days go?!) and today I have something a little different for you.

I honestly didn’t know where I was going with this card, it  evolved as I was going along, as it usually does with me. Rarely do I have an actual plan for my makes… I just see what happens and what works.

I started by smooshing Distress Oxides (Cracked Pistachio, Mermaid Lagoon and Peacock Feathers) onto trimmed watercolour card and spritzed with water to get a watery, inky background. Using two acetate circles, I used Derwent Inktense pencils to draw around the circles and took a brush to add water and soften the edges before adding Distress Crayons.   I then used a Wow Embossing pen and their Rose Gold powder to add definition.

I then decided to add more texture using the polka dot stencil from Set The Tone and I heat embossed this using Wow’s Verdigris powder.  Having decided to go with some sore of aqua theme (as that seemed obvious where I was heading) I used one of the mesh stamps from Mesh-ellaneous around the edges.

Using the circles as masks once more, I added clear shimmering fish from Dare To Swim and heat embossed the ‘seaweed’ using stamps from the Organics set and Wow’s Oceanic powder.

With the background complete, I took the larger fish from Art Rebel and heat embossed using ‘Flame’ from Wow.

Having trimmed one fish from card, I decided to add some netting (from an orange bag) and some fish line under it to add to the whole pollution theme.

For the sentiment I took the large letters from Just Be Happy to make the word ‘recycle’ and heat embossed them in Rose Gold before trimming and matting onto white card and adding to the card using foam tape.

There you have it.  Something a bit different today.  Here’s all the Visible Image products I used for this make..(quite a lot today!)

Don’t forget to join us on the Visible Image Facebook page for daily inspiration from the DT and amazing makes from crafters using Visible Image products… there really are some uber talented people out there! You can also keep up with all thing Visible Image on their Instagram page too.

Catch you next time… H x

 

Christmas Eve: Visible Image

Hello everyone…

It’s my day to share another of my latest DT makes for the fabulous Visible Image and today’s is another Christmas card!

This card uses Christmas Eve, a really gorgeous set of stamps that you can layer up and do all sorts with!

So… I started with a simple watercolour background to which I spritzed on Tattered Angel’s Glimmer Mist and then splattered some watery Gesso over once the Glimmer Mist was dry.

The roof top stamp was them heat embossed using Wow!’s Black Ebony Super Fine powder and then I’ve highlighted the rooftops using a white Posca pen and coloured in the windows using a yellow Sharpie.

I’ve added a scribbly hand drawn border using a fine liner and popped on some zig-zags to look like stitching.

The Christmas tree has been stamped using Bright White Opaque Wow! powder and has been embossed onto black card and then simply fussy cut and adhered to the card over the roof tops slightly using foam tape.

I felt the card was looking a little ‘cold’ (if you get me) so I heat embossed some stars using Wow!’s Metallic Gold Rich powder and this just adds a little warmth.  To add extra interest to the corner, I’ve stamped the holly from the Christmas Chaos set twice, trimmed around one so just the holly remains and then used tiny foam dots to attach to the original holly image.  Having coloured it using watercolours, I  added glossy accents to give a lovely shine!

To finish, the sentiment has been stamped using VersaFine Clair (in Nocturne) and then for some extra Christmas sparkle, I’ve adhered a few clear adhesive gems in the night sky.

Here’s the Visible Image stamp sets I’ve used to make this card…

Christmas Eve

 

Don’t forget to check in regularly on the Visible Image Facebook page for loads of inspiration and tips from the other DT members and of course Instagram has loads of makes (especially if you search for #visibleimage!)

Catch up again soon… thanks for looking!

H x

Christmas Chaos: Visible Image

Hello everyone,

I’m back today sharing another Christmas make for Visible Image.  I’ve used the fabulous Christmas Chaos and the Christmas Backgrounds sets which are just brilliant especially if you like grungy makes like I do!

I kept the background for this card nice and simple, using Distress Oxide’s to create a traditional coloured background to which I added Paperartsy’s Infusions to give a little more depth and then spritzed with some shimmer spray for some glitz.

For the Tree, I coloured some card using Distress Oxide’s again and then heat embossed the beautiful Christmas text using Wow’s Metallic Gold powder to give a rich, warm colour.  Over this I stamped the tree outline from the Christmas Chaos set and fussy cut it out.

I’ve heat embossed the star image three times onto gold card and trimmed two and then trimmed just the star.

After adding foam dots to one of the images and to the trimmed star (so I can layer it up over the top of the tree) I’ve popped this to one side to add some dyed cheesecloth.

The cheesecloth was dyed using Distress Spray Stain and I used the Candied Apple red to match the background of the card. I didn’t want it to stand out too much, just provide a hint of texture under the tree.

The cheesecloth has been glued into place and then the tree added over the top with foam dots behind it.  I added two dots stacked together in the middle of the tree and just one on the outer edges as I wanted a curved look rather than just a flat finish.

For the sentiment, I ripped two sections of vellum and stamped on the top one before stapling it in place and winding round some twine.  This was them matted onto gold card (same card as I stamped the stars onto) and adhered to a card blank.

Fairly simple card for me and it’s a traditional card with a modern edge, if you get me.

Here is the gorgeous Visible Image stamps I’ve used for this make…

Christmas Chaos

 

Christmas Backgrounds

 

Don’t forget to get hold of all the latest Visible Image news and inspiration form the DT by following them on Facebook and Instagram.  Some lovely (and might I add super talented ladies) have joined us on the permanent DT from the guest DT and are making some amazing projects so keep an eye out for them!

That’s all from me today but I’ll catch up soon when I just might have some news to share 😉

H xx

Just Breathe: Visible Image

Hello again…

It’s time again to share some inspiration for the Visible Image design team.  Today’s card uses the totally gorgeous new Just Breathe stamp set that was released in June.

I wanted to make a grungy card using distress oxide ink pads for the background.  Using Walnut Stain, Ground Espresso, Brushed Corduroy and Gathered Twigs, I’ve just smooshed them on a glass mat and layered up the colours until I was happy.

For the die-cut heart, I’ve matted a piece of old map onto card and used the lighter distress oxide ink pads in the same way as before.  The colours I’ve used for this are: Tea Dye, Frayed Burlap and Old Paper.  I’ve then stamped the ‘Breathe’ sentiment all over it with Archival Ink in Watering Can.

The torso stamp (and honestly, how fabulous is it??!) is heat embossed onto white card using Wow’s Metallic Copper heat embossing powder.  To add some depth (and I know I’m not the best at shading) I’ve painted in-between the bones using grey watercolour and added some watered down tea dye distress ink to the edges and bones.

The torn vellum strip at the bottom has had thermal ink splats stamped on and the ‘immortal’ sentiment heat embossed over this.  A ripped strip of card has been tucked in behind it and both have been edges using Vintage Photo distress ink.

To finish, I’ve matted the design onto black card and adhered to a 7×7″ and added a few dabs of Ranger Liquid Pearls in Rose Gold.

Here’s the gorgeous stamp set to swoon over…

And there you have it!  If you haven’t already seen the Visible Image Summer Sale… with a stonking 30% selected stamps and stencils (and there is LOADS to choose from!!) hope on over and grab yourself an absolute bargain.  These stamps are super-duper quality and the stencils are definitely the best quality and thickness I’ve some across – and I have loads of different makes!

Catch up soon folks… H xx

 

More Faerie Magic: Visible Image

Hello everyone…

I’m back today sharing another Faerie Magic make for Visible Image, one of their new releases.

As you know, I love a bit of texture and layering so decided to make some Gelli Print backgrounds a while ago which I could use as backgrounds and I love the text peeping through the paint on this pull, which is the ghost print (the 2nd pull of the same image).

I’ve used corrugated cardboard to create the stripes and large bubble wrap for the polka dots and you can probably spot the stars from the Stars and Stripes stencil.

After trimming the print to size,  heat embossed the Faerie stamp using Wow’s heat embossing powder in Metalline Violet.  To create the raised look, stamp her again onto watercolour card and colour using whatever you have to hand (I used Derwent Intense pencils and Distress Oxide ink pads).

Once coloured, add Wink of Stella to give some sparkle and then, when dry, added glossy accents.  With this dry, carefully fussy-cut the faerie and place to one side while you work on her wings.

I found some old adhesive glitter sheets in my stash and they were perfect for the wings.  Heat emboss two sets of wings using the same powder as previous, trim and stick one set in place.  With the other set, adhere to cardboard and trim.  Place 3D foam tape to the outer edges of this set so they are raised on the edges only, and pop into place.

To echo the bubble wrap dots, I added the small circular stamp in the Faerie Magic set to the left edge of the card and just peeping out from under the Faerie, you can see the ‘stem’ from the Random Art of Kindness stamped in Tonic’s Nuvo ink pad in Metro Grey.

With the stars in place, adhere the trimmed and coloured Faerie using foam tape.

For the flurry of stars, stamp the trio of stars directly onto the background using a permanent ink pad (I used Archival Ink in Jet Black) and colour using a yellow Sharpie pen.  For added sparkle, I brushed on some yellow glitter glue I didn’t know I had and then left to dry.

While drying, I coloured some card using the yellow Sharpie and stamped more stars and cut a few out.  Add tiny bits of foam tape to the back and adhere randomly over the (already stamped) stars.  To match the sparkly stars, add some sparkle to the Faerie’s hair (I used Ranger Stickles in Rose Gold).

Stamp the ‘Faerie’ sentiment’ in black permanent ink and matt the background to card before adhering to the card blank.  Add the other sentiment in the set onto some of the scrap Gelli print and also matt and layer (I also added added some foam tape to give it height).

To finish, add some dabs of glossy accents on the smaller dots and leave to dry.

Here’s the Visible Image products I used for this make…

Faerie Magic

 

Random Art of Kindness

 

Stars and Stripes

There is so much gorgeousness over on the Visible Image Facebook page, lots of inspiration to get those creative thoughts going so do pop over regularly.  You can also find plenty of inspiration over on Instagram on the Visible Image page or by using the #visibleimage so check it out!

Thank you for reading… hope you liked the make 🙂

Heather xx